You should set the transceiver's dial to 14095.6 USB. Then, as the audio
tone generated is 1500 Hz, the actual transmit frequency will be 14097.1
On receive same story: receiving with the dial set to 14095.6 a 1500 Hz
tone will be audible. That's it...
73,
Peter
Op 2016-04-02 21:54 schreef Aaron K5ATG:
> I'm wondering if I am missing something. I'm trying to run WSPR with my K2.
> I'm using a Signalink USB and have the transmit set at 140971 and receive
> at 14956 (as per WSPR instructions). My PC clock is in sync with the WSPR
> program, and I have the AF Gain at about 1 db. I have it set at 20%
> Transmit. The Idle box is unchecked and the K2 is set at USB. I see a
> bunch of signals on the waterfall, but I am not receiving or transmitting
> any signals.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
