WTB: CNC73 weighted knobs with bearing dimple for K3

[Gary Smith-2]

I'm looking for black powder coat
pre-owned CNC73 weighted VFO A & B knobs
with bearing dimple for VFO A.

Please contact me off-list.

Thanks & 73,

Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Gary,

Shaft diameter please.
The older encoder had a shaft diameter of 6mm while the new encoder has
a shaft diameter of 1/4 inch.
Which one are you looking for?

If you have doubts, remove the knob and look at the threaded portion of
the encoder.  If it is green, it is the old 6mm shaft.  If it is nickel
plated, it is the new encoder.

73,
Don W3FPR

On 8/3/2018 9:09 PM, Gary Smith wrote:
> I'm looking for black powder coat
> pre-owned CNC73 weighted VFO A & B knobs
> with bearing dimple for VFO A.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]