WTB: K2DI and/or K2DI-PCI

[Fred N. van Kempen]

Hiyas all,

Looking to expand the K a little bit more, and pretty much the only
thing that would still fit is the DI addon, by Paulí EA3BLQ (SK).

Does anyone still have some his boards available, either just the
boards, in kit or finished forms?

Thanks and 73,

Fred
--
Fred N. van Kempen  PA4YBR / KA4YBR
K2/100+SSB+NB+DSP #005331      ka4ybr at amsat

"The C language is like a carving knife:  simple, sharp, and extremely
 useful in skilled hands. Like any sharp tool, C can injure people who
 are unable to handle it."
                                                        --Andy Koenig

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Mike Harris-9]

G'day,

<snip>
Looking to expand the K a little bit more, and pretty much the only
thing that would still fit is the DI addon, by Paulí EA3BLQ (SK).

Does anyone still have some his boards available, either just the
boards, in kit or finished forms?
<snip>

I could do with one too.  This is too good an add-on for it to fade away.
Maybe someone with access to all the parts should take it on.

Regards,

Mike VP8NO

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Folks,

I don't know where to find Pauli's boards, but if the fixed audio output is
your biggest objective (you use an external interfece to the computer), I
still have boards available - see my website http://w3fpr.qrpradio.com - I
can supply a board and printed documentation for $4 to a US address and $5
for the rest of the world.  Payment in US$ by postal money order or cash for
other than the US. Within the US, cash or personal checks are fine.

73,
Don W3FPR

> -----Original Message-----
>
> <snip>
> Looking to expand the K a little bit more, and pretty much the only
> thing that would still fit is the DI addon, by Paulí EA3BLQ (SK).
>
> Does anyone still have some his boards available, either just the
> boards, in kit or finished forms?
> <snip>
>
> I could do with one too.  This is too good an add-on for it to fade away.
> Maybe someone with access to all the parts should take it on.
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Doug Faunt N6TQS [phone]]

I'm moving in the direction of the W3FPR boards to provide a fixed
level audio to the mike connector.  I've got the v.II.2 boards in both
my K2/100's, and they're very good, but interfere with the KV60.

And I'm likely to go on a DXpedition with many K2's, which means the
fact that the W3FPR mod can easily be installed in the field is very
much a plus for me.

Given Mike's location, I'd be glad to send you either one of the
loaded W3FPR boards, ready to install, or a K2DI v.II.2.

73, doug
N6TQS VP8DIN VU3RYN etc.


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com