WTB: K3 Accessories

[Paul Lonnquist]

I know, mission impossible, but sometimes the impossible happens.

I am looking to purchase the following accessories:

1.  KTCXO3-1  TCXO  (0.1 ppm typ) High Stability Reference Oscillator
2.  KDVR3  Digital Voice Recorder
3.  KFL3A-1.8K  1.8 kHz, 8-pole filter
4.  KFL3A-400    400 Hz, 8-pole filter
5.  KFL3A-250    250 Hz, 8-pole filter
6.  KBPF3  General Coverage RX Bandpass Module

No particular order of purchase, eventually want them all.
Then I look for a 2nd receiver for the rig.  Once I have invested the
additional
Dollars, then I¹m sure that K4 will come out and ruin everything!!

So, if you have these in your radio and don¹t want them, I do.  Please send
info on what
You have and your asking price to me.  Email is good at QRZ.

Thanks and 73, Paul NS6V


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Larry Gerhardstein]

I am having difficulty meshing the SVGA board to the I/O board.  Any
suggestions?

73, Larry W7IN


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Larry Gerhardstein]

Correction, meant to say the P3 I/O and SVGA boards.  Sorry

On 3/30/2014 20:05, Larry Gerhardstein wrote:

> I am having difficulty meshing the SVGA board to the I/O board.  Any
> suggestions?
>
> 73, Larry W7IN
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Larry Gerhardstein]

Please disregard post.  I finally got the boards to fully mesh.  Tnx &
73 all, Larry W7IN

On 3/30/2014 20:10, Larry Gerhardstein wrote:

> Correction, meant to say the P3 I/O and SVGA boards.  Sorry
>
> On 3/30/2014 20:05, Larry Gerhardstein wrote:
>> I am having difficulty meshing the SVGA board to the I/O board. Any
>> suggestions?
>>
>> 73, Larry W7IN
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/elecraft
>> Help:http://mailman.qth.net/mmfaq.htm
>> Post:mailto:[hidden email]
>>
>> This list hosted by:http://www.qsl.net
>> Please help support this email list:http://www.qsl.net/donate.html
>> Message delivered [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]