A follow-up;
While I still would like to buy an excess
KAT3A for my K3 & if you have one, please
contact me off-list. It turns out my KAT3A
is now working perfectly at this time
Before I packed it up to send back for
repair I looked at the socket and noticed
they were not gold pins, only the male
pins on the main board are gold. I doubt
there would be corrosion so soon but
what's to lose?
I dripped some Deoxit 100 in and let it
set a few minutes, then squirted regular
15% deoxit with its 85% lube, cleaned and
reinstalled it. The KAT3A is now working
perfectly on 160 again and as before, all
the other bands are also working.
I emailed Elecraft to let them know I
don't need the RMA and won't be sending it
in. Glad they were there and willing had I
needed to get it repaired.
73 all,
Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html