Weller WTCPT Solder Station

[nn5g]

I need to replace the on-off switch for this soldering
iron station. Would anyone have the parts number
and/or best place to order from. Thanks de Paul NN5G
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Timothy A. Raymer]

At 15:51 01/02/2006, Paul Kelly wrote:
>I need to replace the on-off switch for this soldering
>iron station. Would anyone have the parts number
>and/or best place to order from.

Gregory Beat, W9GB, seems to be even more obsessive about his love
for the Weller soldering stations.  (I only have three.;-))

"G. Beat" <[hidden email]>

Here is a couple of recent posts about Weller stuff from the forum:

---------------------------------------------------------------------------
The Weller station is still under Weller warranty -- IF less than 1
year old.  I would definitely contact Weller / Cooper Tools for
warranty repair.
http://www.cooperhandtools.com/brands/electronic_applications/index.htm

Here is the Adobe Acrobat warranty informaiton, note that out of
warranty work can be expensive.
http://www.cooperhandtools.com/brands/electronic_applications/PDFs/WellerRepairPricingPolicy.pdf

Likely the problem is within the Weller base unit's electronics or
possibly the temperature probe inside the iron.  Save yourself some
$$ and hold off on an iron purchase that you may not need (this is
NOT a TCP series - where an iron change is 95% possibility of the
problem).  Call them Monday.

Greg
w9gb

Weller Contact information:

Repair Department
P.O. Box 728
Apex, NC 27539
1000 Lufkin Road
Apex, NC 27502
Phone: [phone] Ext. 2
Fax: [phone]
www.cooperhandtools.com

------------------------------------------------------------------------------
------------------------------------------------------------------------------
BTW, the fellow I talked to at Weller tech support, Bubba Powers, is
outstanding.  I left him a voice mail this morning, and he called me back a
few hours later.  He was also very helpful.  800-476-3030 is his number if
you have any Weller iron problems.
------------------------------------------------------------------------------

Hope this helps!

Tim Raymer
73 de KA0OUV
K2 #1383


Timothy A. Raymer
Missouri Department of Health
and Senior Services

<traymer[at]mail.state.mo.us>                        <RaymeT[at]dhss.mo.gov>
<KA0OUV[at]arrl.net>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com