Weller WTCPT magnetized tip

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Weller WTCPT magnetized tip

Jeremiah McCarthy
IMHO, it is unlikely that the tip has become magnetized...If that were possible, it would become magnetized by the magnet inside the heater that is the operational heart of this soldering station...I think it is more likely that the magnetic plunger, which activates the temperature switch, has become stuck, or that the return spring has broken...This can easily be checked by removing the tip while the iron is cold and pushing on the plunger up inside the heater with a small screw driver...It should easily move up about 1/2 inch and spring back down when the pressure is released...

Jerry, wa2dkg
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com