-----Original Message-----
Reading the mail here about the mods to the SSB Module...I remember that
someone was playing around with some shielding to cut down on blow-by or
something like that. What ever happened to that? I think it was a person
in England who was experimenting with shielding on the SSB board and the
like.
Lee - k0WA
-----------
I tried to make these shields and they can be found here:
http://www.qslnet.de/member/la3za/bilder/KSB2-shield-top.jpg and
http://www.qslnet.de/member/la3za/bilder/KSB2-shield-under.jpg, but I did
not make any measurements.
The idea came originally from Merlin W3ICT
73
Sverre
LA3ZA
http://www.qsl.net/la3za/
-----Original Message-----
Next, I went to local hobby shop and bought some tin. I made little tin
"houses" which I placed around the matching toroids, ground them carefully.
It worked too. Next I added a little tin "fence" which went on the bottom
the board, shielding the input of the filter from the output. It worked.
Three times is a charm!
Merlin W3ICT
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com