Never mind. I must have been looking at an old manual. The KX3 MENU:TX
DLY setting is clearly documented on Page 41 of the KX3 Owner's Manual Rev.
C5
<ftp://ftp.elecraft.com/KX3/Manuals%20Downloads/E740163%20KX3%20Owner's%20man%20Rev%20C5.pdf>
.
73,
Bob, N6TV
On Wed, Oct 17, 2018 at 2:26 AM Bob Wilson, N6TV <
[hidden email]> wrote:
> What is the fixed delay between KEY OUT going low and RF coming out of a
> KX3? The K3 has a CONFIG:TX DLY setting, but I find no equivalent in the
> KX3 manuals. The concern would be RF hot switching if the external
> amplifier relay is too slow.
>
> From the KX3 manual:
>
> "The keyline output goes low during transmit, and can be used for
> transmit/receive switching of linear amplifiers and transverters." The TX
> Delay does not appear to be documented.
>
> (KEY OUT on a KX3 is the RING contact of the 2.5 mm stereo connector
> labeled ACC2).
>
> 73,
> Bob, N6TV
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
