I am well into phase 3 of my K2 build (this is my third time building
one) and this is the phase where you start seeing if you installed a
wrong capacitor somewhere, or you are missing some. As I was happily
checking off caps as I was installing them, I noticed I am missing a
couple. Or am I?
Dummy me, I didn't properly do an inventory (which I have done on all
previous kits I have built) so I don't know if I misplaced a part...
am I missing a part from the kit... or did I put a wrong cap
somewhere. I just assumed all was there. So I had to take the time
to track down all of the 43 capacitors which is somewhat time
consuming.
After about 15 minutes of searching, and a couple sips of brandy, it
appears that I am missing one (or misplaced it). Luckily, I have
spares in my junkbox so I just used one of the spares. This has
happened twice already.
Note to self: do an inventory on your next kit!
73,
Jason N8XE
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
