Windows 10 Update Breaks COM Port for K3 & P3 Utilities

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Windows 10 Update Breaks COM Port for K3 & P3 Utilities

Mark Wheeler
With the latest Windows 10 update earlier this week, my K3S and P3 can no longer communicate with my Windows 10 PC via the USB cables.  I’ve gone into Device Manager and right clicked on the COM12 device drive and clicked “update driver” and that updated from a 2016 driver to a 2017 CM port driver, but neither connect the PC to my K3S or P3.  Any suggestions?  Thank you.

Mark
WU6R
(formally KM6HFR)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Windows 10 Update Breaks COM Port for K3 & P3 Utilities

Alan - G4GNX
Windows has probably changed the COM port. Check in the Device Manager, by
unplugging the rig, then re-plugging to see which COM port re-appears.
There's a way of preventing Windows from changing COM ports, but I forget
what it is. Perhaps someone else can help, or maybe Google is your friend.
:-)

73,

Alan. G4GNX

-----Original Message-----
From: Mark Wheeler
Sent: Sunday, May 27, 2018 3:29 PM
To: [hidden email]
Cc: Mark Wheeler
Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities

With the latest Windows 10 update earlier this week, my K3S and P3 can no
longer communicate with my Windows 10 PC via the USB cables.  I’ve gone into
Device Manager and right clicked on the COM12 device drive and clicked
“update driver” and that updated from a 2016 driver to a 2017 CM port
driver, but neither connect the PC to my K3S or P3.  Any suggestions?  Thank
you.

Mark
WU6R
(formally KM6HFR)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Windows 10 Update Breaks COM Port for K3 & P3 Utilities

Michael Eberle
In reply to this post by Mark Wheeler
You may also want to try going into Device Manager and disabling the COM
port and then enabling it again.  I have an add-on serial port card in
my computer and I have to disable and re-enable both ports every time I
reboot or they will not work.

As a side note, I have a friend who had major issues with his computer
after installing a Windows 10 update.  He finally found out that if you
have Avast or AVG anti-virus software, it must be disabled before
running the update.  Apparently it sees some of the update as malware
and will put the computer in an endless loop of reboots.

Mike - KI0HA


On 5/27/2018 09:59, G4GNX wrote:

> Windows has probably changed the COM port. Check in the Device
> Manager, by unplugging the rig, then re-plugging to see which COM port
> re-appears.
> There's a way of preventing Windows from changing COM ports, but I
> forget what it is. Perhaps someone else can help, or maybe Google is
> your friend. :-)
>
> 73,
>
> Alan. G4GNX
>
> -----Original Message----- From: Mark Wheeler
> Sent: Sunday, May 27, 2018 3:29 PM
> To: [hidden email]
> Cc: Mark Wheeler
> Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3
> Utilities
>
> With the latest Windows 10 update earlier this week, my K3S and P3 can
> no longer communicate with my Windows 10 PC via the USB cables.  I’ve
> gone into Device Manager and right clicked on the COM12 device drive
> and clicked “update driver” and that updated from a 2016 driver to a
> 2017 CM port driver, but neither connect the PC to my K3S or P3.  Any
> suggestions?  Thank you.
>
> Mark
> WU6R
> (formally KM6HFR)
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]