Tony,
I use to have a K3, still enjoy this list.
I run a P3 SCS modem on winlink .... I think the issue now could be band
conditions.
They are pretty bad
http://www.bandconditions.com/ also, the propagation
channel selection
in Winlink Express is showing the same here in Florida.
Good Luck,
Jack
W4GRJ/AFA4DG
-----Original Message-----
From: Elecraft [mailto:
[hidden email]] On Behalf Of Tony
Lyon
Sent: Friday, July 15, 2016 9:58 AM
To:
[hidden email]
Subject: [Elecraft] Winlink & K3 settings
Folks,
I recently set up an SCS DR-7400 with my K3 on Winlink.
I must have some settings that
are slightly off, since my link
up capabilities (HF) are not
as reliable as I expected.
So, I would appreciate feedback
from Winlink users who are actively using their K3.
Here is what I am interested in:
TNC setup values in Winlink (RMS Express)
K3 settings used.
73,
Tony Lyon (KJ5XF)
______________________________________________________________
Elecraft mailing list
Home: <
http://mailman.qth.net/mailman/listinfo/elecraft>
http://mailman.qth.net/mailman/listinfo/elecraftHelp: <
http://mailman.qth.net/mmfaq.htm>
http://mailman.qth.net/mmfaq.htmPost: <mailto:
[hidden email]> mailto:
[hidden email]
This list hosted by: <
http://www.qsl.net>
http://www.qsl.netPlease help support this email list: <
http://www.qsl.net/donate.html>
http://www.qsl.net/donate.html Message delivered to
<mailto:
[hidden email]>
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]