Some have incorrectly interpreted the email below to imply that we are
adding mouse support to the P3. I believe W0EB was just referring to our
upcoming official release for P3SVGA -keyboard- support, but since he
mentioned that a mouse was part of his keyboard, some thought that mouse
support is also included in our new P3 software.
Adding mouse support was not part of our original design and is a
significant amount of work. At this time we are maxed out on other
projects and are not planning on adding mouse support to the P3.
Via its front panel knob, the P3 does have excellent cursor control that
can jump the K3 to the cursor's frequency by pressing the knob in
lightly to activate its switch. Both VFO A and B can be independently
controlled by the 'A' and 'B' cursors in the P3.
73,
Eric
---
www.elecraft.com
On 8/31/2012 6:20 PM, Jim Sheldon wrote:
> To whoever listed the Logitech 360 wireless keyboard as being compatible with the P3/SVGA board, THANKS! Picked one up at the local Walmart this evening. Plugged it in, pulled the battery tab as directed and it works just fine. Had some problem with several wired Kb's being susceptible to even low levels of RF in the shack. The Logitech hasn't shown any problems even with moderate SWR levels and 500 watts out. This much output with anything over 1.5:1 SWR would lock up most other wired keyboards I had on hand.
>
> I bout the mk360 version that contains the mouse as well and will keep the mouse standing by until Elecraft releases the firmware that Eric was reportedly doing a test/demo on at a recent hamfest. Having mouse capability as well as the KB will really make the P3/SVGA combo sing.
>
> W0EB
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
