Wish List - Lo cut and High cut - 50 Hz steps instead of 100

[hf4me]

I have been working PSK recently and also Olivia.  Many times somebody will come up almost on top of your QSO and positioning of the signals seems to mostly (of course) be where the 100 HZ step of low cut and hi cut will either leave the guy inside the cut with you or damage your signal where it is not readable.  50 hz step sure would help.  Maybe there should be a region where it switches to 50 from 100 as the lo and hi approach each other so as to not make it tedious to get there?

Just a thought as I try to eliminate interferrence.  Might work good for CW also.  Width and shift at 50 also?  Probably not.

Thanks es 73, de Jim KG0KP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html