Thanks Jim,
Yes salt is more of an issue. Fortunately it was dry.
I seem to have cleaned it up but still got an issue with the rotary
control on far right the switch doesn't always switch.
72
Dom
M1KTA
On 05/02/2014 13:24,
[hidden email] wrote:
> This is why when I operated from the beach in Punta Cana as HI/K8MR in
> the 2014 ARRL and CQ CW DX contests, I took care to tape over all
> unused connectors, the seam where the two halves hinge together, and
> the speaker (I was using ear buds). While I did not do so, it might
> also be good to put some clear tape over the LEDs that stick through
> the front panel.
>
> I then placed the radio inside a large ZipLock bag, open only enough
> to let the cables pass through. I used the dial lock when possible,
> and either tuned through the bag, or cheated a bit and opened the bag
> to get at the controls.
>
> I imagine salt would be even more destructive than sand.
>
> 73,
>
> Jim K8MR
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html