Ever since we got our K3's last fall, we've had a continuing problem with
both WinTest and WriteLog losing com with the Microham MK2R/Server. We've
had lots of dialogue with Microham and no response from WinTest.
I have swapped MK2R's with the one on the second station that runs the
FT1000D's. No difference.
This weekend we are using WriteLog for the CQ 160 contest. For no apparent
reason, the keyboard will start sending jibberish on its own. Just resetting
the MK2R does not help. Closing WL, turning off the MK2R and closing and
restarting the Microham server puts everything back in working order.
In CQ 160 the problem did not happen until 4 hours into the contest. Then it
recurred regularly for several hours and then it settled down again. What is
different this time (and why I finally subscribed) is that the operator
caught a glimpse of PTT ERR on the K3 once while this event was happening.
This morning I changed computers (the last thing to change besides the K3)
and, after several hours of running the CQ message over and over in TEST
mode, the problem recurred. I made sure the PTT and KEY RTS and DTR are OFF
and I now changed the Microham PTT configuration to QSK to stop it from
invoking any PTT. It is CQing again.
Anyone else had this issue? Any ideas?
Tom Taormina, K5RC
Virginia City NV
Home of W7RN and K7RC
http://k5rc.cc FOC 1760
"Communication is the problem to the answer" - 10cc
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
