XG1 instruction error?

[Vin Cortina]

Hi everyone,

Maybe I just need to get a good nights rest, but in the instructions for XG1
assembly, it says to install C6 with the shorter flat side toward the C6
label.  But the silkscreen shape is opposite to that.  Which do I believe?


Thanks in advance.

Vin Cortina  KR2F

K1-4 s/n:1977
KX1  s/n:1476
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Vin,

The narrow end of the blue bodied trimmer on my XG1 is near the label for
C6.
In general, follow the instructions rather than the diagrams - I believe
this trimmer was changed sometime in the life of the XG1, and the older
white bodied trimmer may have best been placed the other way around.

73,
Don W3FPR

> -----Original Message-----
>
> Maybe I just need to get a good nights rest, but in the
> instructions for XG1
> assembly, it says to install C6 with the shorter flat side toward the C6
> label.  But the silkscreen shape is opposite to that.  Which do I believe?
>
>
> Thanks in advance.
>
> Vin Cortina  KR2F
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com