> I have both the XG1 and the XG2. What I would like is to convert the XG1
> to either 160 or 10M. If this is possible I would buy another XG1. Can
> anyone suggest any ideas on this and if it doable and component values?
>
> The reason I want both 160M and 10M:
> For 160M I could use the XG1 to test and check receive loops. The XG1
> could be a signal source connected to a loop. I presently use an MFJ
> antenna analyzer for this.
>
> For 10M I could use the XG1 to test coax loss. I keep a record of all my
> coax loss going to the tower and the other antennas. Instead of dragging
> out the dummy load I could use the XG1 as a signal source on the end of
> the coax and check on the receiver in the shack for approximate loss.
>
> 73,
> N2TK, Tony
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
