XMIT EQUALIZTION
Locked
 
|
I bought a new mic and decided to set it up using equalization for “pile up” mode. I had always ran equalization at 0 across the board previously. Everything went well until this morning I switched over to PSK31 with the audio coming in on LINE IN. I kept having issues with being able to set the power level and then I noticed that on the low end of the PSK spectrum I had hardly any power at all but in the mid to high end things were fine. Then it hit me, it was following the equalization pattern I had set up for the mic. I see that there is a second equalization pattern for FM, ESSB and AM unfortunately which will not help me in this case as I assume it only come in when you have those modes selected. Wonder if there is any chance of getting a second pattern in the SSB mode? I am sure some guys would like to have a rag chew mode and a DX mode. I need one for PSK and one for DX. It is troublesome to have to dial out all of the equalization everytime I want to do PSK. Any suggestions as I might be missing something. 73 Mike K4PI
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Are you using DATA A for PSK31 operation?
73, Lyle KK7P > I bought a new mic and decided to set it up using equalization for “pile up” mode... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Mike K4PI
Two thoughts.
First for PSK you should be using Data-A This bypasses RX and TX EQ, any compression settings and also disables the mic. On the EQ thing. You can set eq settings with a program called K3EZ I use it with different settings for rag-chew and net and another for contesting and DX. each for three different microphones. The original creator is not supporting it anymore but there are copies around. I believe one of the members of the group hosted the install files on his server but I no longer have the link for them. If you have the program you can store eq settings and recall them on demand. I could email it but its bigger than most emails can handle. this program does a whole host of cool stuff EQ is just one small part. If anyone knows where to find K3EZ perhaps you could post it here. On 1/3/2013 9:34 AM, Mike Greenway wrote: > I bought a new mic and decided to set it up using equalization for “pile up” mode. I had always ran equalization at 0 across the board previously. Everything went well until this morning I switched over to PSK31 with the audio coming in on LINE IN. I kept having issues with being able to set the power level and then I noticed that on the low end of the PSK spectrum I had hardly any power at all but in the mid to high end things were fine. Then it hit me, it was following the equalization pattern I had set up for the mic. I see that there is a second equalization pattern for FM, ESSB and AM unfortunately which will not help me in this case as I assume it only come in when you have those modes selected. Wonder if there is any chance of getting a second pattern in the SSB mode? I am sure some guys would like to have a rag chew mode and a DX mode. I need one for PSK and one for DX. It is troublesome to have to dial out all of the equalization everytime I want to do PSK. Any suggestions as I might be missing something. 73 Mike K4PI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Here's a copy of an email I sent to the Elecraft reflector in August regarding N2BC's K3_EZ program: Bill, N2BC, sent me an email in June saying he was "facing some serious near-term health issues" and wasn't able to maintain the program. He said he'd be offering the source code for someone else to maintain it, but I don't remember seeing that email. Let's hope Bill is doing OK. His direct email address is [hidden email] . I have the 7M ZIP files of versions 2.0.0.5, 2.0.0.7, and 2.0.0.8. I had some issues with the last one on my Windows 7/64 computer. The files are too large to upload to the Yahoo Group Elecraft_K3 files folder, though I can email copies. Maybe Elecraft can archive them on its website. 73, Jim N7US -----Original Message----- If anyone knows where to find K3EZ perhaps you could post it here. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |