Hi guys,
although the XVTR seems to operate quite ok there are some issues:
Local Oscillator Level:
Max is 3.3 volts with L3 near initial adjustment but L4 and L5 are about two turns each out of the body. Osc. restarts ok.
is this ok?
Keying for filter adjustment:
When keying the rig power slowly decreases. just a few percent.
Overload protection behaves strangely:
Rig is configured for use with K2
Jumper 8 removal results in power off from XVTR
Keying the K2 triggers nothing. The LEDs don't begin to flash.
any hint appreciated!
Gerhard
DH3FAW
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
