XV Transverter RF Voltages

[k2qo]

Hi Gang,

Does anyone have a schematic showing typical RF voltages for the XV series?
My XV222 is low on power out, about 3W, and I need to run through the xmit
chain. I had full power last September and last month it was putting out 7W
or so. Something bit the dust.

Thanks,
Mark

73,
Mark K2QO
FN03ra
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill Schwantes]

I'm not an expert but I have built and aligned a half dozen XVs.

Rather than measure the RF voltage, I would recommend going back through
the Alignment and Test section of the XV Build/Operation Manual.  The DC
voltages shown there are much easier to measure accurately. I'm sure you'll
be able to use that info to determine what changed since you last operated
your XV222.

73 Bill
W7QQ DM75ao
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[markmusick]

You can find the manuals here:

http://www.elecraft.com/K2_Manual_Download_Page.htm#XV 

They should have what you are looking for.

Mark Musick, WB9CIF

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Mark
Adams
Sent: Tuesday, July 19, 2016 6:45 PM
To: [hidden email]
Subject: [Elecraft] XV Transverter RF Voltages

Hi Gang,

Does anyone have a schematic showing typical RF voltages for the XV series?
My XV222 is low on power out, about 3W, and I need to run through the xmit
chain. I had full power last September and last month it was putting out 7W
or so. Something bit the dust.

Thanks,
Mark

73,
Mark K2QO
FN03ra
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]