XV144 Overload test fails

[GS-3]

Hi list!

I thought I could do the last steps of my XV144. Heard my first 2m beacon
today! And I have 20W output power.

Everything is fine except: The overload test fails. It fails in a way that
absolutely nothing is happening while performing the test.

When removing the jumper J8 the XV144 sign goes dark. Then I set all
transverter number switches to their off positions, removed the control
cable and keyed the hf rig, a k2. No leds blinking.

By the way: I use 5W max to drive the XV144. So the 1milliwatt rule does not
apply.

Is there something obvious that I am missing?

Thanks!


Gerhard Schwanz
DH3FAW
mailto:[hidden email]
http://www.gs-personal.de


       

       
               
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com