XV144 - power input to RF module

[zeke7237]

I'm considering modifying the XV144 I use in my microwave rover by
removing the RF power module. It looks like I should get around +10dBm
or so from the driver stage alone, which is just what I need to drive
the mixers in my transverters while being low enough to prevent major
damage on sequencing failure, etc. Has anyone done this and measured
the output?

de w1rt/john
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html