There is no high SWR detection or protection in any of the XV transceivers.
If operated into a high SWR, yes, high RF voltages will exist in the Low
Pass Filter which can easily exceed the voltage rating of the chip
capacitors.
73,
Don W3FPR
On 4/9/2012 4:14 AM, Samir Popaja wrote:
> Hello,
>
> I just wondering if the XV144 has some kind of protection against high SWR?
>
> I have burned C44 in XV144, twice in very short period. First time when I
> using
> XV144 to tune input circuit of my amplifier, and second time I forgot to
> switch
> input relays when testing and the XV144 was without load for less the 1s, it
> was enough to burn C44...
>
>
http://www.sk7mw.se/samir/xv144/xv144_burned_c44.jpg>
> Thank you
>
> Samir, sm7vzx
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html