Y-BOX v1.3 Closeout Pricing; New Y-BOX v2.1 Now In Stock

[Bob Wilson, N6TV]

To review, the Y-BOX provides a reliable and convenient way to connect the
K3 ACC port to multiple devices, including the KAT500, KPA500, KPA1500,
band decoders, DigiKeyers, RemoteRig boxes, etc.  The Y-BOX replaces any
15-pin Y-Cables you may already be using.

While supplies last (I only have a few left), the original "Version 1.3"
Y-BOX will be sold for only $129 ea. (originally $139).  Order this version
if you don't have a SteppIR controller, or don't have a requirement to
power a KPA500 or KPA1500 on or off remotely.  Version 1.3 requires an
Elecraft KPAK3AUX cable (not supplied) for connecting the Y-BOX to an
Elecraft amplifier or tuner.

For the eham.net reviews, please see
https://www.eham.net/reviews/detail/13296

The new "Version 2.1" Y-BOX dedicates one connector for a KAT500, KPA500,
or KPA1500, with no KPAK3AUX cable required.  Simply connect an economical
15-pin M/F cable (but not a VGA cable) between the Y-BOX v2.1 "AMP AUX"
port and your Elecraft device.  The Y-BOX will connect only the required
lines, emulating the wiring of the KPAK3AUX cable.

Version 2.1 also adds two new internal headers. The first is optionally
used to open the keying line to the amplifier, providing convenient RCA
connectors for SteppIR owners with a SteppIR Tuning Relay (a device which
opens the keying line whenever the antenna is tuning).

The second header optionally connects the DIGOUT1 line of the K3 to the
Elecraft amplifier's PWR ON pin, so you can remotely power the amp. ON or
OFF with a simple K3 macro, or your K3 logging software.  This technique is
documented in the K3 Remote Owner's Manual
<http://www.elecraft.com/manual/K3%20Remote%20Owner's%20Manual%20%20Rev%20D.pdf>,
on page 21.  With the Y-BOX version 2.1 and a 15-pin M/F DE-15 cable, no K3
to KPA500 cable modification is required; the required connection is made
inside the Y-BOX.

Version 2.1 is now available to order, priced at $139 ea.  Here's a direct
link to the order form:

https://goo.gl/forms/Guu6OC6NinTlasY93

For more details and photos, please see https://bit.ly/Y-BOX (freshly
updated to show what's new in version 2.1).

Thanks again for all your support and encouragement.

73,
Bob, N6TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]