check out the SPE Expert 1k-FA, it will do everything you asked for and
more.
http://www.radio-ham.eu/Expert1K-FA.htmJack
W4GRJ
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of dw
Sent: Thursday, September 02, 2010 12:18 PM
To: Elecraft_List
Subject: [Elecraft] Your suggestions for AMP for K2 QRP unit
Hi All,
The new EC 500 amp coming out will require the KPA-100 PA for K2 users.
I am interested in adding an amp that can run from the K2 without the
KPA-100.
I don't care about QSK, I can switch the amp ON and OFF XMIT manually or
I can build an interface that will switch the amp from the K2 AUX line.
However, I will be locating the amp in a remote room (not located at in
the shack room) so I will want an amp that I can perhaps build a wired
control for band selections.
It would be better if it does not have a built in tuner.
But since it will be remote, I will need a unit that will not require
direct controling of band switching, tuning etc.
Also, it must be able to output at least 200 watts CW all bands.
Your suggestions very welcome.
Thanks
Duane
--
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
