at1 attenuator questions

[Gary Lee-2]

I have an at1.

How do I tell on from off for each switch, and what are the values of each
switch?

Totally blind, so need a little help.


Thanks and 73.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike WA8BXN]

>From what I see in the manual,  if a switch is in the direction of the
resistors, then the resistors selected by that switch are causing their
attenuation. Thus if all switches are away from the resistors, there is no
attenuation.

If the switches are above the resistors, and the BNC connectors to the left
and right (switches toward you), the attenuation values left to right are

1,1,3,6,10 and 20 dB

73 - Mike WA8BXN

 
 
 
 
-------Original Message-------
 
From: Gary Lee
Date: 4/23/2010 10:18:20 PM
To: elecraft list
Subject: [Elecraft] at1 attenuator questions
 
I have an at1.
 
How do I tell on from off for each switch, and what are the values of each
Switch?
 
Totally blind, so need a little help.
 
 
Thanks and 73.
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:[hidden email]
 
This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html