Elecraft

beta release for K3 - PSK63

Classic

List

Threaded

5 messages Options

G4FNL

beta release for K3 - PSK63

Folks, HNY to all

I believe that there is a potential firmware upgrade that is imminent that
will enable the K3 to be able to generate and receive PSK63 (as well as
PSK31). If I have understood correctly, I would be grateful for an idea of
likely timescales ?

Many thanks

73 Graham G4FNL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

wayne burdick

Re: beta release for K3 - PSK63

Administrator

Hi Graham,

This was added last October. Here are the relevant release notes:

MCU 4.93 / DSP 2.83, 10-16-2014

* PSK63 MODE ADDED: To select PSK31 or PSK63, first tap either end of the MODE switch to select DATA, then hold the DATA MD switch and use VFO A to select the PSK data rate.

73,
Wayne
N6KR

On Jan 8, 2015, at 2:29 PM, "G4FNL" <[hidden email]> wrote:

> Folks, HNY to all
>
> I believe that there is a potential firmware upgrade that is imminent that
> will enable the K3 to be able to generate and receive PSK63 (as well as
> PSK31). If I have understood correctly, I would be grateful for an idea of
> likely timescales ?
>
> Many thanks
>
> 73 Graham G4FNL
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

G4FNL

Re: beta release for K3 - PSK63

Wayne

Thank you - wow - what a fantastically fast response! I will check it out.

Many thanks....

73 Graham G4FNL

-----Original Message-----
From: Wayne Burdick [mailto:[hidden email]]
Sent: 08 January 2015 22:33
To: [hidden email]
Cc: Elecraft Reflector
Subject: Re: [Elecraft] beta release for K3 - PSK63

Hi Graham,

This was added last October. Here are the relevant release notes:

MCU 4.93 / DSP 2.83, 10-16-2014

* PSK63 MODE ADDED: To select PSK31 or PSK63, first tap either end of the
MODE switch to select DATA, then hold the DATA MD switch and use VFO A to
select the PSK data rate.

73,
Wayne
N6KR

On Jan 8, 2015, at 2:29 PM, "G4FNL" <[hidden email]> wrote:

> Folks, HNY to all
>
> I believe that there is a potential firmware upgrade that is imminent
> that will enable the K3 to be able to generate and receive PSK63 (as
> well as PSK31). If I have understood correctly, I would be grateful
> for an idea of likely timescales ?
>
> Many thanks
>
> 73 Graham G4FNL
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]

Michael Eberle

Re: beta release for K3 - PSK63

In reply to this post by G4FNL

I thought that a firmware update that allows PSK63 had already been
released but I do not recall what the revision number is.

Mike
KI0HA

On 1/8/2015 4:29 PM, G4FNL wrote:
> Folks, HNY to all
>
> I believe that there is a potential firmware upgrade that is imminent that
> will enable the K3 to be able to generate and receive PSK63 (as well as
> PSK31). If I have understood correctly, I would be grateful for an idea of
> likely timescales ?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Phil Wheeler-2

Re: beta release for K3 - PSK63

In reply to this post by G4FNL

Yes, it was done before you asked about it,
Graham: That *is* fast :-)

Phil W7OX

On 1/8/15 2:36 PM, G4FNL wrote:

> Wayne
>
> Thank you - wow - what a fantastically fast response! I will check it out.
>
> Many thanks....
>
> 73 Graham G4FNL
>
>
> -----Original Message-----
> From: Wayne Burdick [mailto:[hidden email]]
> Sent: 08 January 2015 22:33
> To: [hidden email]
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] beta release for K3 - PSK63
>
> Hi Graham,
>
> This was added last October. Here are the relevant release notes:
>
> MCU 4.93 / DSP 2.83, 10-16-2014
>
> * PSK63 MODE ADDED: To select PSK31 or PSK63, first tap either end of the
> MODE switch to select DATA, then hold the DATA MD switch and use VFO A to
> select the PSK data rate.
>
> 73,
> Wayne
> N6KR
>
>
> On Jan 8, 2015, at 2:29 PM, "G4FNL" <[hidden email]> wrote:
>
>> Folks, HNY to all
>>
>> I believe that there is a potential firmware upgrade that is imminent
>> that will enable the K3 to be able to generate and receive PSK63 (as
>> well as PSK31). If I have understood correctly, I would be grateful
>> for an idea of likely timescales ?
>>
>> Many thanks
>>
>> 73 Graham G4FNL