change DATA mode alone

[Jorge Diez - CX6VM-2]

Hello,

 

I am new in RTTY and settled up my K3 in DATA mode = AFSK A to do few QSO´s
during CQWW RTTY contest.

 

I noticed that sometimes the K3 change alone to FSK D

 

Do you know why happens this?

 

73,

Jorge

CX6VM

K3 #4077

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Jorge,

The data sub-modes are remembered per band.  For example, if you set the
K3 to FSK D for 20 meters, and then set to AFSK A for 40 meters, both of
those settings will be remembered.

73,
Don W3FPR

On 9/24/2011 11:31 PM, Jorge Diez - CX6VM wrote:

> Hello,
>
>
>
> I am new in RTTY and settled up my K3 in DATA mode = AFSK A to do few QSO´s
> during CQWW RTTY contest.
>
> I noticed that sometimes the K3 change alone to FSK D
>
> Do you know why happens this?
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jorge Diez - CX6VM-2]

Hi Don,

playing a Little more, I noticed that when I click in a callsign in the N1MM
bandmap, the K3 change to FSK D

Will ask in N1MM list

73,
Jorge
CX6VM

-----Mensaje original-----
De: Don Wilhelm [mailto:[hidden email]]
Enviado el: Domingo, 25 de Septiembre de 2011 03:25 a.m.
Para: Jorge Diez - CX6VM
CC: [hidden email]
Asunto: Re: [Elecraft] change DATA mode alone

Jorge,

The data sub-modes are remembered per band.  For example, if you set the
K3 to FSK D for 20 meters, and then set to AFSK A for 40 meters, both of
those settings will be remembered.

73,
Don W3FPR

On 9/24/2011 11:31 PM, Jorge Diez - CX6VM wrote:
> Hello,
>
>
>
> I am new in RTTY and settled up my K3 in DATA mode = AFSK A to do few
QSO´s
> during CQWW RTTY contest.
>
> I noticed that sometimes the K3 change alone to FSK D
>
> Do you know why happens this?
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Jorge,

That does sound like N1MM is changing the data submode for you.
 From the K3 Programmer's Reference, the DT command will set the DATA
sub-mode (if the K3 is already in DATA mode).
The MD command will set the K3 mode.  MD6; would set DATA mode, and then
DT2; would set FSK D.

There may be menu settings in N1MM to control the behavior, so asking on
the N1MM list is a prudent thing to do.

73,
Don W3FPR


On 9/25/2011 9:28 AM, Jorge Diez - CX6VM wrote:
> Hi Don,
>
> playing a Little more, I noticed that when I click in a callsign in the N1MM
> bandmap, the K3 change to FSK D
>
> Will ask in N1MM list
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jorge Diez - CX6VM-2]

Hi Don,

 

that´s right.

 

I received an answer from John K3CT that was working with K3 and N1MM

 

Jorge,

See section 3 of the manual:

http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios&structure=N1MM+
Logger+Documentation

 

The RTTY selection is mapped to the K3 radio mode of FSK D.

 

Just if it´s of help for someone else

 

73,

Jorge

CX6VM

 

-----Mensaje original-----
De: Don Wilhelm [mailto:[hidden email]]
Enviado el: Domingo, 25 de Septiembre de 2011 11:02 a.m.
Para: Jorge Diez - CX6VM
CC: [hidden email]
Asunto: Re: [Elecraft] change DATA mode alone

 

Jorge,

 

That does sound like N1MM is changing the data submode for you.

>From the K3 Programmer's Reference, the DT command will set the DATA

sub-mode (if the K3 is already in DATA mode).

The MD command will set the K3 mode.  MD6; would set DATA mode, and then

DT2; would set FSK D.

 

There may be menu settings in N1MM to control the behavior, so asking on

the N1MM list is a prudent thing to do.

 

73,

Don W3FPR

 

 

On 9/25/2011 9:28 AM, Jorge Diez - CX6VM wrote:

> Hi Don,

>

> playing a Little more, I noticed that when I click in a callsign in the
N1MM

> bandmap, the K3 change to FSK D

>

> Will ask in N1MM list

>

>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dave Perry N4QS]

Jorge,

In N1MM, click on Config, then click on top selection Configure Ports, Mode
Control, etc., click on the Mode Control tab and then look for selection
under Mode Sent to Radio.  For RTTY to -- select AFSK.

Dave, N4QS



----- Original Message -----
From: "Jorge Diez - CX6VM" <[hidden email]>
Cc: <[hidden email]>
Sent: Sunday, September 25, 2011 8:28 AM
Subject: Re: [Elecraft] change DATA mode alone


Hi Don,

playing a Little more, I noticed that when I click in a callsign in the N1MM
bandmap, the K3 change to FSK D

Will ask in N1MM list

73,
Jorge
CX6VM

-----Mensaje original-----
De: Don Wilhelm [mailto:[hidden email]]
Enviado el: Domingo, 25 de Septiembre de 2011 03:25 a.m.
Para: Jorge Diez - CX6VM
CC: [hidden email]
Asunto: Re: [Elecraft] change DATA mode alone

Jorge,

The data sub-modes are remembered per band.  For example, if you set the
K3 to FSK D for 20 meters, and then set to AFSK A for 40 meters, both of
those settings will be remembered.

73,
Don W3FPR

On 9/24/2011 11:31 PM, Jorge Diez - CX6VM wrote:
> Hello,
>
>
>
> I am new in RTTY and settled up my K3 in DATA mode = AFSK A to do few
QSO´s
> during CQWW RTTY contest.
>
> I noticed that sometimes the K3 change alone to FSK D
>
> Do you know why happens this?
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

 > I received an answer from John K3CT that was working with K3 and N1MM
 >
 >>
 >> See section 3 of the manual:
 >>
 >>
http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios&structure=N1MM+Logger+Documentation
 >
 >> The RTTY selection is mapped to the K3 radio mode of FSK D.
 >
 > Just if it´s of help for someone else

The more complete answer is that N1MM Logger allows the user to specify
the digital sub-mode separately for RTTY or PSK.  Sub-mode is specified
on the "Mode Control" tab in the N1MM configuration dialog.

       N1MM        K3
     -----------------------------
       RTTY ..... FSK D (LSB)
       RTTY-R ... FSK D REV (USB)
       PSK ...... DATA A (USB)
       PSK-R .... DATA A REV (LSB)
       AFSK ..... AFSK A (LSB)
       AFSK-R ... AFSK A (USB)

73,

    ... Joe, W4TV


On 9/25/2011 10:07 AM, Jorge Diez - CX6VM wrote:

> Hi Don,
>
>
>
> that´s right.
>
>
>
> I received an answer from John K3CT that was working with K3 and N1MM
>
>
>
> Jorge,
>
> See section 3 of the manual:
>
> http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios&structure=N1MM+
> Logger+Documentation
>
>
>
> The RTTY selection is mapped to the K3 radio mode of FSK D.
>
>
>
> Just if it´s of help for someone else
>
>
>
> 73,
>
> Jorge
>
> CX6VM
>
>
>
> -----Mensaje original-----
> De: Don Wilhelm [mailto:[hidden email]]
> Enviado el: Domingo, 25 de Septiembre de 2011 11:02 a.m.
> Para: Jorge Diez - CX6VM
> CC: [hidden email]
> Asunto: Re: [Elecraft] change DATA mode alone
>
>
>
> Jorge,
>
>
>
> That does sound like N1MM is changing the data submode for you.
>
>> From the K3 Programmer's Reference, the DT command will set the DATA
>
> sub-mode (if the K3 is already in DATA mode).
>
> The MD command will set the K3 mode.  MD6; would set DATA mode, and then
>
> DT2; would set FSK D.
>
>
>
> There may be menu settings in N1MM to control the behavior, so asking on
>
> the N1MM list is a prudent thing to do.
>
>
>
> 73,
>
> Don W3FPR
>
>
>
>
>
> On 9/25/2011 9:28 AM, Jorge Diez - CX6VM wrote:
>
>> Hi Don,
>
>>
>
>> playing a Little more, I noticed that when I click in a callsign in the
> N1MM
>
>> bandmap, the K3 change to FSK D
>
>>
>
>> Will ask in N1MM list
>
>>
>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html