Tim: This is covered on page 21 of the Owner's manual, bottom right corner.
You'll need to be in Mode CW for this to work. Tap REC, then the M1 button,
then REC.
Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Tim Tucker
Sent: Tuesday, September 28, 2010 6:20 PM
To: Elecraft Reflector
Subject: [Elecraft] clear a programmable function?
I accidentally set a menu config to programmable function M1, overwriting
the macro I had stored there. I've tried clearing M1 by tapping REC, M1,
REC, but it is not working. I know this because when I try to write the
macro back to M1 using the K3 utility, M1 still behaves in the way I don't
want it to. BTW, I accidentally programmed M1 for both the press and hold
function, so I'm trying to reset both.
Any insight?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html