Fred,
The main changes that would have created that difference is the newer speced
crystals and the winding of T7. If you have added a new set of crystals,
that is good, but check to see if T7 is the newer ration of 20 turns to 5
turns - it matches the filter output impedance better than the older turns
ratio.
73,
Don W3FPR
> -----Original Message-----
>
> According to the Sherwood table, K2 # 1140 demonstrated 70 DB at
> 2 khz, while serial # 3160 posted 80 DB at 2khz, phase noise
> limited, actually better.
>
> Exactly what changes to the radio led to this improvement? I
> would like to be sure I have done the apprpriate mods to serial # 700 !!!
>
> 72 and HNY,
>
> Fred - kt5x
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.1/611 - Release Date: 12/31/2006
12:47 PM
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com