Gary,
The TEXT DEC button acts like the menus - you must change VFO B to ON or
OFF and VFO A changes the threshold for the decoder.
The 'IM' character issued from the paddles should stop transmission
without a pause. If there is a character buffered by the K3 (as there
will be if using the K3 utility or a memory), then the buffer must clear
before transmission will stop.
If you simply stop sending, transmission will stop 4 seconds later.
73,
Don W3FPR
Gary Lee wrote:
> How do I turn text dec off? Tried issuing "swh40;" no dice. I thought it
> would act as a toggle.
> Also, noticed when sending that "..--" does not immediately kick me out of
> transmit mode as the manual states.
>
> Running firmware 2.78. Issuing commands with hyperterminal.
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.237 / Virus Database: 270.10.25/1955 - Release Date: 02/16/09 06:55:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
