cw to psk

Hello Group,
Need a little help with the cw to Psk on the K3. I can transmit with the paddles but only get a steady tone. If I hit "M2" I send cq and can hear the psk tones. I must be looking at something I didn't set. Listen on another rig and only a stead tone. have it in "data mode" selected "Psk" and I see the small "T" below the data icon.Also have the key plug in the "paddle" jack in the rear.
 Any ideas?

Don..w2xb

P.S. no problem sending psk or data with the soundcard and MixW.

[Don Wilhelm-4]

Don,

I just tried it and it works fine for me - whether the Test Decode
(small "T") is on or off, it works FB.
Any chance that you are first tapping the 'XMIT' button?  If so, don't
do that - just hit the paddle and go.
You should see the message you entered with the paddles displayed in the
VFO B area.

73,
Don W3FPR

W2XB wrote:

> Hello Group,
> Need a little help with the cw to Psk on the K3. I can transmit with the
> paddles but only get a steady tone. If I hit "M2" I send cq and can hear the
> psk tones. I must be looking at something I didn't set. Listen on another
> rig and only a stead tone. have it in "data mode" selected "Psk" and I see
> the small "T" below the data icon.Also have the key plug in the "paddle"
> jack in the rear.
>  Any ideas?
>
> Don..w2xb
>
> P.S. no problem sending psk or data with the soundcard and MixW.
>  
>  

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com