firmware 4.18 and AGC

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

firmware 4.18 and AGC

Arie Kleingeld PA3A-2
AGC slow acting weird.

Situation:
Listening in the Ukrainian contest in cw this evening. Noise level is
about s5. Listening to a running station that is s9+20, cw speed about
35wpm. AGC is on slow and rf-gain in fully clockwise.

After a silence in signal (meter on s5) when te station starts to
transmit, the agc is working but without any hold time, so sounds like
agc-fast with very fast decay. After the first few dits and dahs ("TU")
the agc holds and works like it should on agc-slow.
I have heard that before but not as frequent.
I think this is a bug.



Other settings for your info:
mode : cw
band: 40m
firmware: 4.18
agc pls: nor
agc hold: 15
agc dcy: soft
agc slp: 013
agc thr: 006
agc-f: 100
agc-s: 020


best regards,
Arie PA3A
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: firmware 4.18 and AGC

Guy, K2AV
Firmware 4.18 has been recalled.  Do not bother to post any more
problems with 4.18.

73, Guy.

On Sat, Nov 6, 2010 at 4:13 PM, Arie Kleingeld PA3A <[hidden email]> wrote:

> AGC slow acting weird.
>
> Situation:
> Listening in the Ukrainian contest in cw this evening. Noise level is
> about s5. Listening to a running station that is s9+20, cw speed about
> 35wpm. AGC is on slow and rf-gain in fully clockwise.
>
> After a silence in signal (meter on s5) when te station starts to
> transmit, the agc is working but without any hold time, so sounds like
> agc-fast with very fast decay. After the first few dits and dahs ("TU")
> the agc holds and works like it should on agc-slow.
> I have heard that before but not as frequent.
> I think this is a bug.
>
>
>
> Other settings for your info:
> mode : cw
> band: 40m
> firmware: 4.18
> agc pls: nor
> agc hold: 15
> agc dcy: soft
> agc slp: 013
> agc thr: 006
> agc-f: 100
> agc-s: 020
>
>
> best regards,
> Arie PA3A
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html