first checks resist. kx1

[rlb-6]

The more than and less than are a bit confusing to me
so can someone tell me if the following are within
tolerence?

pins
1@3.123
3@5.79
4@5.79
5@3.87
8@while this showed resist. it was below scale
13@20
14@20
16@20
17@30
18@29
20@3.125

All the rest of the pins showed open with no resist.


Next IC
4@29

All the rest of the pins showed open

With S-1 on no reading from either of the diodes other
than showing open
With S-2 on showed resistance-climbing and cut off
much like a capac. charging and than discharge.

The above readings do not sound right to me.  Have
checked all parts for correct placement, checked for
solder bridges and cold solder joints.

Any suggestions??????

While I am not new to kit building having done Heath
Kits and ten tec kits I concider myself far from an
expert.


Randy
AG8A


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

The '>1k' means that any resistance reading between 1k and infinity is
acceptable.  Readings below 1k are an indicator of a problem.

Similarly, '<50' means any resistance below 50 ohms are good, but anything
above 50 is not good.

Substitute other numbers for the '1k' and '50' as required.

You often find better results if you use a fixed range on your DMM rather
than using the auto-ranging.

73,
Don W3FPR

> -----Original Message-----
>
> The more than and less than are a bit confusing to me
> so can someone tell me if the following are within
> tolerence?
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com