flat side trimmer cap c9?

[tom-239]

good eve, not perfectly clear on which is the "Flat side" of c9, on the board for auto tuner for my K1. The outline on the board is completely rounded, not much help. Both sides of c9 are flat, one side has more surface area then the ofher side. Which is the flat side?                                                                                                                                                                                    Tom  km4cu
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Tom,

You have one of the new boards where the silkscreening did not adhere over
the tinned solder pads.
Rathr than trying to describe how to mount the capacitor in words, look at
the parts placement diagram in the back of the manual for a picture.

73,
Don W3FPR

> -----Original Message-----

>
> good eve, not perfectly clear on which is the "Flat side" of c9,
> on the board for auto tuner for my K1. The outline on the board
> is completely rounded, not much help. Both sides of c9 are flat,
> one side has more surface area then the ofher side. Which is the
> flat side?
>
>                                                           Tom  km4cu
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.17.39/686 - Release Date: 2/14/2007
7:54 AM

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com