freq counter probe ?

[Bryan Savill]

So, apparantly I should remove the probe from my K2/10 for normal
operation ???
The manual is clear that it should be replaced after installing the KSB2.
What's the recommendation here?

73, Bryan VE6HBS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Bryan,

Yes, the manual says to put the probe into the TP2 test point and
'store' it there so you can align the filters without removing the top
cover.  However, if the filters are properly aligned, you do not want to
inadvertently change them (or let some other op play with them at Field
Day), so I recommend that the probe be removed.
With the KPA100 installed, it is mandatory that the probe be removed,
but this is not pointed out in either the K2 nor the KPA100 manual.

73,
Don W3FPR

On 12/1/2013 5:08 PM, Bryan wrote:

> So, apparantly I should remove the probe from my K2/10 for normal
> operation ???
> The manual is clear that it should be replaced after installing the KSB2.
> What's the recommendation here?
>
> 73, Bryan VE6HBS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html