Elecraft

hEADPHONE'S RECEIVE LEVEL?

Classic

List

Threaded

4 messages Options

Jim Harris-2

hEADPHONE'S RECEIVE LEVEL?

*Good afternoon, Friends.*
**
*I would like to "turn down" the volumn in my headset so when I send CW or
when I change bands. I know there must be a Menu setting within my K3 to
do this but I can't locate it. I have the KE7X Manual, my Owners Manual,
my Assembly Manual.*
**
*Can someone please direct me to the setting so I can turn the "level" down
to a more comfortable listening level in my Headphones.*
**
*Thanks for any help you'll can give.*
**
*Best 73.*
*Jim.........*
*WA4NTM*
*K3 - S/N 2802*
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

ve3dvy

Re: hEADPHONE'S RECEIVE LEVEL?

Hi Jim

I dont believe that there is a menu item for separate level control for
the headphones relative to the speaker volume.
to adjust the transmit monitor level for sending either CW or phone
hold in the power control knob for half a second and it will now adjust
monitor level tap it to return to its normal operation. note the
"Monitor" label in yellow under that contol

On 10/10/2012 3:08 PM, Jim Harris wrote:

> *Good afternoon, Friends.*
> **
> *I would like to "turn down" the volumn in my headset so when I send CW or
> when I change bands. I know there must be a Menu setting within my K3 to
> do this but I can't locate it. I have the KE7X Manual, my Owners Manual,
> my Assembly Manual.*
> **
> *Can someone please direct me to the setting so I can turn the "level" down
> to a more comfortable listening level in my Headphones.*
> **
> *Thanks for any help you'll can give.*
> **
> *Best 73.*
> *Jim.........*
> *WA4NTM*
> *K3 - S/N 2802*
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Dom M1KTA

KX3

Hi all,

Ref:
http://www.ae5x.com/blog/2012/10/10/m1ktakh8-qrp-with-kx3/

My KX3 Serial number is 1082

I'm qrv for one more night 11th October 08:00-18:00 UTC (starting 10 ish hours from right now) from beach on north shore of American Samoa with a perfect NE orientation, 800m cliff <200m behind beach and 600m coral reef shelf in front so lovely salt water for 10 wavelength out so really good take off for 15m and 20m vertical dipoles right on the waters edge. Antennas are speaker wire cut to resonance fed with RG58 hung on 10m fishing poles with bottom element 1m above the wet sand all in all about $50 worth of antenna so anyone can make one.

No B.S. I am running the KX3 barefoot and it is only set at 5W as no mains power for any supply.

If you fancy a KX3 2 way qso please try and find me...

On 15m I will be tx on 21.015 or 21.055, 20m 14.015 or 14.055 on either working simplex or up2 if there is a pile up.

My CW is SLOWER than the average DXer 12-16wpm so shouldn't have a problem trying to copy me. I tend to ignore cw sent faster as I cannot copy it.

I was working US stations (all the way to East Coast) about 15:00UTC and after that this morning so just before to just after local runrise.

72

Dom
KH8/M1KTA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Jim Harris-2

Re: hEADPHONE'S RECEIVE LEVEL?

In reply to this post by ve3dvy

*Howdy, Folks.*
*
*
*Thanks for correcting the error of ways. The "MON" adjustment did the
trick. *
*
*
*Thanks for all that replied. I appreciate each and every one of the
responses.*
*
*
*Best 73!*
*Jim....*
*WA4NTM*
*
*
On Wed, Oct 10, 2012 at 3:14 PM, david Moes <[hidden email]> wrote:

> Hi Jim
>
> I dont believe that there is a menu item for separate level control for
> the headphones relative to the speaker volume.
> to adjust the transmit monitor level for sending either CW or phone
> hold in the power control knob for half a second and it will now adjust
> monitor level tap it to return to its normal operation. note the
> "Monitor" label in yellow under that contol
>
>
>
>
> On 10/10/2012 3:08 PM, Jim Harris wrote:
> > *Good afternoon, Friends.*
> > **
> > *I would like to "turn down" the volumn in my headset so when I send CW
> or
> > when I change bands. I know there must be a Menu setting within my K3 to
> > do this but I can't locate it. I have the KE7X Manual, my Owners Manual,
> > my Assembly Manual.*
> > **
> > *Can someone please direct me to the setting so I can turn the "level"
> down
> > to a more comfortable listening level in my Headphones.*
> > **
> > *Thanks for any help you'll can give.*
> > **
> > *Best 73.*
> > *Jim.........*
> > *WA4NTM*
> > *K3 - S/N 2802*
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>