Elecraft › [K3]

headphone problem

Classic

List

Threaded

4 messages Options

Joe K2UF

headphone problem

I can get stereo on front panel phones jack but not on the rear panel phones
jack. I have sub rcvr in right ear and main rcvr in left ear on front
phones jack. Using the same headset plugged into rear jack and no other
setting changes all I get is main rcvr NOW IN RIGHT ear and no audio in left
ear. Any ideas ???

Thanks Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

w0mu

Re: headphone problem

You are in the stereo out jack right?

Mike W0MU

J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net

On 11/3/2011 10:25 PM, Joe K2UF wrote:

> I can get stereo on front panel phones jack but not on the rear panel phones
> jack. I have sub rcvr in right ear and main rcvr in left ear on front
> phones jack. Using the same headset plugged into rear jack and no other
> setting changes all I get is main rcvr NOW IN RIGHT ear and no audio in left
> ear. Any ideas ???
>
> Thanks Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many electrons
> were inconvenienced.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

w0mu

Re: headphone problem

In reply to this post by Joe K2UF

SPKRS
STEREO or MONO; 4 to 8 Ω
Plugging in external speaker(s) cuts off the internal
speaker. A stereo plug is recommended; tip is left
speaker, ring is right. If you only have a mono plug,
set CONFIG:SPKRS to 1 to disable right-channel
audio. (Also see important note below.)
PHONES
STEREO or MONO; 16 Ω min. recommended
The front and rear-panel headphone jacks are both
isolated with series resistors. This allows you to use
mono phones on one jack and stereo on the other, if
required. You’ll need stereo phones for AFX (audio
effects) and stereo dual receive (with sub receiver).
You can plug in headphones and speaker(s) at
the same time, and hear audio in both, if you set
CONFIG:SPKR+PH to YES. However, if you set
CONFIG:SPKRS to 1, setting SPKR+PH to YES
will force mono headphone as well as speaker
output. You can set SPKRS to 2 if you use a stereo
plug at the external speaker jack, or if no external
speaker is plugged in.

Mike W0MU

J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net

On 11/3/2011 10:25 PM, Joe K2UF wrote:

Joe K2UF

Re: headphone problem

Yes the phones are plugged into the 'phones' jack directly under the rs232
jack. Spkr+ph = no spkrs = 1

Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of W0MU Mike Fatchett
Sent: Friday, November 04, 2011 12:34 AM
To: [hidden email]
Subject: Re: [Elecraft] headphone problem

SPKRS
STEREO or MONO; 4 to 8 Ω
Plugging in external speaker(s) cuts off the internal
speaker. A stereo plug is recommended; tip is left
speaker, ring is right. If you only have a mono plug,
set CONFIG:SPKRS to 1 to disable right-channel
audio. (Also see important note below.)
PHONES
STEREO or MONO; 16 Ω min. recommended
The front and rear-panel headphone jacks are both
isolated with series resistors. This allows you to use
mono phones on one jack and stereo on the other, if
required. You'll need stereo phones for AFX (audio
effects) and stereo dual receive (with sub receiver).
You can plug in headphones and speaker(s) at
the same time, and hear audio in both, if you set
CONFIG:SPKR+PH to YES. However, if you set
CONFIG:SPKRS to 1, setting SPKR+PH to YES
will force mono headphone as well as speaker
output. You can set SPKRS to 2 if you use a stereo
plug at the external speaker jack, or if no external
speaker is plugged in.

Mike W0MU

J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net

On 11/3/2011 10:25 PM, Joe K2UF wrote:
> I can get stereo on front panel phones jack but not on the rear panel
phones
> jack. I have sub rcvr in right ear and main rcvr in left ear on front
> phones jack. Using the same headset plugged into rear jack and no other
> setting changes all I get is main rcvr NOW IN RIGHT ear and no audio in
left
> ear. Any ideas ???
>
> Thanks Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many
electrons

> were inconvenienced.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html