heil mic adaptor

[Scott Dunlavey]

hello... I am looking for the cable/adaptor that goes from the K3 to a
Heil PR-20 mic;  the cable is CC-1 XLR-K... anybody have one I can
buy??? or any ideas or suggestions ??!!


scott
w2ntv
future K3 owner
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[w7go]

Most of the major amateur radio dealers have them.

73,
Tony W7GO

On 7/23/2012 7:39 AM, Scott Dunlavey wrote:

> hello... I am looking for the cable/adaptor that goes from the K3 to a
> Heil PR-20 mic;  the cable is CC-1 XLR-K... anybody have one I can
> buy??? or any ideas or suggestions ??!!
>
>
> scott
> w2ntv
> future K3 owner
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill Steffey NY9H]

i believe that radio shack has an xlr inline   and an 8 pin foster
type plug....
tada...  a 2 conductor cable shielded,,,     done...

or just buy a readily assembled  xlr  extension at radio shack or a
music store,,,chop
then add the foster  8 pin to the proper end...  fast and half wired already.


bill

At 11:10 AM 7/23/2012, Tony Morgan wrote:

>Most of the major amateur radio dealers have them.
>
>73,
>Tony W7GO
>
>On 7/23/2012 7:39 AM, Scott Dunlavey wrote:
> > hello... I am looking for the cable/adaptor that goes from the K3 to a
> > Heil PR-20 mic;  the cable is CC-1 XLR-K... anybody have one I can
> > buy??? or any ideas or suggestions ??!!
> >
> >
> > scott
> > w2ntv
> > future K3 owner
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jim Brown-10]

On 7/23/2012 7:39 AM, Scott Dunlavey wrote:
> any ideas or suggestions

Find a female XLR connector a 1/8-in plug, (audio distributors like
Sweetwater or Full Compass) and heat up your soldering iron. Connectors
to mate with the front panel connector (called a Foster) can be found at
ham stores. I stock up when I go to hamfests.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ke9uw]

http://www.gigaparts.com/store.php?action=profile&sku=ZHL-CC-1-XLR-K

$35.00