improper TX data mode

[Dick Frey]

I cannot operate FT8 on 80 60 40 30 or 12m. It works fine on the other
bands.
Data mode (usb) is selected on all. However, on the P3, the filter window
is displayed improperly on the bands that don't work -- it is centered on
the display and is actually LSB because I can ALT the mode and copy FT8 but
not send. Properly, it is on the high side of center on the bands that do
work.

Any ideas on what I have fat-fingered?

--
Dick - K4XU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Dick,

Check your data sub-mode (DATA MD) on *each band*.  Make sure 80, 40, 30
and 12 m are not set to AFSK_A instead of DATA_A.

The data submode is band specific and may have been set to AFSK_A by
your software if you happened to have operated RTTY.

73,

    ... Joe, W4TV


On 2020-11-13 5:51 PM, Dick Frey wrote:

> I cannot operate FT8 on 80 60 40 30 or 12m. It works fine on the other
> bands.
> Data mode (usb) is selected on all. However, on the P3, the filter window
> is displayed improperly on the bands that don't work -- it is centered on
> the display and is actually LSB because I can ALT the mode and copy FT8 but
> not send. Properly, it is on the high side of center on the bands that do
> work.
>
> Any ideas on what I have fat-fingered?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]