improved KX1 mini-log .pdf file (easier to print)

[wayne burdick]

The first version of the KX1 mini-log that we provided was too close to
the margins, causing some home printers to auto-resize. We've just
uploaded a new version with just four sheets to a page that should
print actual size. The .pdf file for the mini-log can be found at:

      http://www.elecraft.com/KX1/KX1.htm

For check purposes, the distance between the thumb screws is 4.95
inches.

73,
Wayne
N6KR

---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
http://mailman.qth.net/mailman/listinfo/elecraft
You must subscribe to post.
Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm
Elecraft page: http://www.elecraft.com

[David Pratt-3]

My first few attempts at printing it out produced log sheets with 4.65"
between the thumb screws.

Changing the paper size within Acrobat from A4 to the US 8.5" x 11"
size, and setting the printer dialog to "Print as image" rather than
"Fit to page" produces log at the correct size.

Thanks, Wayne, for an excellent suggestion. I shall be out /P with my
KX1 tomorrow and will give the logs a test under real time conditions.

73 de David G4DMP

In a recent message, wayne burdick <[hidden email]> said....
>The first version of the KX1 mini-log that we provided was too close to
>the margins, causing some home printers to auto-resize. We've just
>uploaded a new version with just four sheets to a page that should
>print actual size. The .pdf file for the mini-log can be found at:
>
>     http://www.elecraft.com/KX1/KX1.htm
>
>For check purposes, the distance between the thumb screws is 4.95
>inches.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
http://mailman.qth.net/mailman/listinfo/elecraft
You must subscribe to post.
Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm
Elecraft page: http://www.elecraft.com