k2 noise blanker

classic Classic list List threaded Threaded
22 messages Options
12
Reply | Threaded
Open this post in threaded view
|

Re: K3 power loss: Last settings forgotten

David Woolley (E.L)
Erik N Basilier wrote:
>
> I am very familiar with the internals of computers, more than enough to
> know that these behaviors can be expected unless one pointedly designs
> to eliminate them, and that *can* be done. There is no fundamental

One factor to consider here is that the flash memory has a limited write
cycle life time, typically in the range of 100,000 to 1,000,000 cycles.
  That means that you don't want to write every change back immediately.


> reasons that any machine that contains a computer needs to behave like a
> PC. I do not mean to criticize the design of the K3, particularly since
> we know that there are more important goals for the designers. My
> objective was just to find out whether the behavior of my K3 was
> consistent with the K3 design. In general, I find the K3 to be much more
> free from those "computerish" characteristics than a PC is, and that is
> one reason I am using a K3 and not a radio that depends on a PC to
> function.

--
David Woolley
"The Elecraft list is a forum for the discussion of topics related to
Elecraft products and more general topics related ham radio"
List Guidelines <http://www.elecraft.com/elecraft_list_guidelines.htm>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 power loss: Last settings forgotten

AC7AC
In reply to this post by AC7AC
CONTENTS DELETED
The author has deleted this message.
12