k2 side tone`

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

k2 side tone`

vk4cro
hi Group I just got k2 2538 and it fired up ok
BUT no sidetone.
Please give some leads to locate problem
tnx Ron vk4cro K3 s/n 1498
Reply | Threaded
Open this post in threaded view
|

Re: k2 side tone`

Joe Vrabel
Ron: Have you tried going to Menu, then Edit and rotate tuning knob to increase sidetone level?  It may be set to 000. 73: Joe
Reply | Threaded
Open this post in threaded view
|

Re: k2 side tone`

vk4cro
hi Joe done the sl to 240 but nix
When I am in cw mode small c is after freq but a capital F
appears above . no mention of this in the manual.
tnx Ron

On Sun, Sep 5, 2010 at 6:53 PM, Joe Vrabel [via Elecraft] <[hidden email]> wrote:
Ron: Have you tried going to Menu, then Edit and rotate tuning knob to increase sidetone level?  It may be set to 000. 73: Joe





Reply | Threaded
Open this post in threaded view
|

Re: k2 side tone`

Don Wilhelm-4
  Ron,

If the "F" you are referring to flashes every few seconds (replacing the
"c"), then you have Fast Play turned on - see page 103 in the manual.  I
don't believe any character can be displayed above the mode indicator.

On your sidetone problem check your firmware level - if is version 2.04P
(hold any button in when turning on the K2 to see it displayed briefly),
then you most likely have the sidetone source set wrong.  It must be set
to U8-4 for K2s above SN 3000.

To change the sidetone source, first set the menu STL parameter to
something reasonable, like 25, then enter the menu for STP - hold EDIT
to edit the parameter, and then tap DISPLAY to toggle the sidetone
source.  When you hear sidetone, stop tapping and exit the menu.  Note,
if you have firmware version 2.04r, the sidetone source cannot be
changed and you have a hardware problem.

If that does not work, please provide the serial number of your K2,
whether or not it has the KPA100 or KIO2 option, and your firmware
version - and tell me if you have access to a 'scope.

73,
Don W3FPR

On 9/5/2010 7:49 PM, vk4cro wrote:
> hi Joe done the sl to 240 but nix
> When I am in cw mode small c is after freq but a capital F
> appears above . no mention of this in the manual.
> tnx Ron
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html