Carlos,
The spot and keyer sidetone are not in the same path as receive.
I suspect that you need a better IF filter (CAL FIL) than what is
provided in the manual.
You can download Spectrogram from my website www.w3fpr.com (look near
the bottom of the home page for the links) to give you a visual picture
of the filter passband position and filter width.
Tom Hammond N0SS (SK) created a document that will allow you to use
Spectrogram 5.17 to align your K2 filters. It is available at
http://www.mmccs.com/mmarc/n0ss/k2_filters_using_gram_v5r17.pdf.
73,
Don W3FPR
On 7/10/2020 4:07 PM, carlos.p wrote:
> hi, just finished the receiver, no problems in aligning,
> just noticed a slightly raspy tone in cw receive, not smooth
> spot and keyer are ok
> i wonder.....
> carlos on6cn
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
