k3/10 Now getting audio; but, not enough

[george-2]

Thanks for all of the help regarding my audio issue. Turned bias on as
suggested and can hear myself; but, the audio level is low.  Selected
High, tried to put the additional audio stage in with "3" on the mike
menu; but, get a response "N/A".  Have yet to find the right combination
to get sufficient audio out of the mike.

I still feel that my problem is configuration.

Any thoughts?

George
K2CM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

George,

It is unusual that an electret microphone does not have enough audio.
Please tell us which microphone, which mic jack, etc.

Where did you see that one should tap "3" on the mic menu?  I have not
heard of that selection.  It is not in the Main Menu listing in the manual.

73,
Don W3FPR

On 9/5/2012 10:51 AM, [hidden email] wrote:

> Thanks for all of the help regarding my audio issue. Turned bias on as
> suggested and can hear myself; but, the audio level is low.  Selected
> High, tried to put the additional audio stage in with "3" on the mike
> menu; but, get a response "N/A".  Have yet to find the right combination
> to get sufficient audio out of the mike.
>
> I still feel that my problem is configuration.
>
> Any thoughts?
>
> George
> K2CM
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html