[k3] Audio distortion on strong CW signals - after a while

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

[k3] Audio distortion on strong CW signals - after a while

Pete Smith N4ZR
This is something I have noticed in contests recently, and just now in a
qso with a strong local - after a few minutes, the audio becomes
distorted, what we used to call a T7 note.

I have read about distortion caused by banging up against the audio
limiter, but this happens even at very low audio output.  I also have
the impression that it does not occur when I first turn on the radio,
and that when I'm transmitting a lot, in contests, it starts to happen
earlier and earlier, sometimes emerging at the end of a brief contest QSO.

Amp or no, makes no difference, and it appears to happen on all bands.

Any ideas?

--
73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [k3] Audio distortion on strong CW signals - after a while

Barry N1EU
Pete, please try and record a .wav file when your rig is doing this so we can all hear

Barry N1EU

Pete Smith N4ZR wrote
after a few minutes, the audio becomes distorted
Reply | Threaded
Open this post in threaded view
|

Re: [k3] Audio distortion on strong CW signals - after a while

Pete Smith N4ZR
will do.

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000



On 1/23/2011 12:24 PM, Barry N1EU wrote:
> Pete, please try and record a .wav file when your rig is doing this so we can
> all hear
>
> Barry N1EU
>
>
> Pete Smith N4ZR wrote:
>> after a few minutes, the audio becomes distorted
>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [k3] Audio distortion on strong CW signals - after a while

Robby.VY2SS
In reply to this post by Pete Smith N4ZR
I noticed this for the first time in the 160M contest last night. It almost sounds like aurora or a faulty relay at the transmit station. I switch to the RX ant and everything was fine. I used my beverage a lot even to the USA because of this. I found that when I had a chance to reboot the K3 the problem was gone for a while.

Could it be one of those COR gadgets reacting to the huge signals in the contest.

73,

-Robby
VY2SS
Reply | Threaded
Open this post in threaded view
|

Re: [k3] Audio distortion on strong CW signals - after a while

Robby.VY2SS
Oops.  I managed to get throught the snow to inspect my vertical and found the connection to the feedpoint was broken off and barely touching the bottom of the radiator depending on the whim of the wind.

Hoping for a big improvement tonight.

-Robby