k3 Auxbus system?

[Bruce Beford]

Thanks, Lyle. The question remains, however- Is the auxbus on the K3
compatible with the KPA100? Can a "remote" KPA100/KAT100 from a K2 system be
used with the K3/10?

-Bruce N1RX

> Wondering if there will be auxbus signals at the PC (rs232) port
> like the k2.
> For all of us who have the kpa100 and kat100 remoted and
> want to use it with the k3......

The RS232 port is a true RS232 port in the K3.  No special cables needed.

The 15-pin accessory connector, however, includes the auxbus :-)

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

> Is the auxbus on the K3
> compatible with the KPA100? Can a "remote" KPA100/KAT100 from a K2 system be
> used with the K3/10?

I suspect the KPA100 will not be supported.  The KPA100 is not approved
by the FCC as a standalone HF PA, but is considered an integral part of
the K2.  Remoting it is something many of us have done, but is not
supported by Elecraft.

I believe the KAT100 will be supported by the K3.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com