k3, HRD, and signaLink USB problem

[buddys70]

haven't updated k3 firmware
haven't updated HRD software
haven't updated windows xp software

been using hrd with signalink and k3 for months, until 2 days ago.  i
rebooted pc, to no avail.

in CW mode PTT on sihnalink does not come on when transmit initiated, nor
does light on k3

in psk mode, PTT on signalink does not come on, but transmit light on k3
does, no power from radio

in rtty mode, same symptoms as psk

any ideas/suggestions would be appreciated

thanks, es 73 de
w3bs, buddy
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Buddy,

That sounds like the PTT in the SignaLink box has broken.
HRD has an option to send PTT via a K3 command - try setting that on and
see if things work correctly.

73,
Don W3FPR

On 5/31/2014 9:32 AM, buddy s wrote:

> haven't updated k3 firmware
> haven't updated HRD software
> haven't updated windows xp software
>
> been using hrd with signalink and k3 for months, until 2 days ago.  i
> rebooted pc, to no avail.
>
> in CW mode PTT on sihnalink does not come on when transmit initiated, nor
> does light on k3
>
> in psk mode, PTT on signalink does not come on, but transmit light on k3
> does, no power from radio
>
> in rtty mode, same symptoms as psk
>
> any ideas/suggestions would be appreciated
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[W2RMS]

Interesting coincidence is that i just finished hooking up my K3 to the Signalink USB and HRD. Like 11 minutes ago.
The cable i use has 3 plugs: line in, line out and PTT.
I didn't connect the PTT at all because i'm using that jack on the K3 for my foot switch.
So HRD keys the radio via CAT. Works fine.
__________________
Slava (Sal) B, W2RMS
[hidden email]

On May 31, 2014, at 9:36 AM, Don Wilhelm <[hidden email]> wrote:

> Buddy,
>
> That sounds like the PTT in the SignaLink box has broken.
> HRD has an option to send PTT via a K3 command - try setting that on and see if things work correctly.
>
> 73,
> Don W3FPR
>
> On 5/31/2014 9:32 AM, buddy s wrote:
>> haven't updated k3 firmware
>> haven't updated HRD software
>> haven't updated windows xp software
>>
>> been using hrd with signalink and k3 for months, until 2 days ago.  i
>> rebooted pc, to no avail.
>>
>> in CW mode PTT on sihnalink does not come on when transmit initiated, nor
>> does light on k3
>>
>> in psk mode, PTT on signalink does not come on, but transmit light on k3
>> does, no power from radio
>>
>> in rtty mode, same symptoms as psk
>>
>> any ideas/suggestions would be appreciated
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]