I have a question about N1MM and a K3 for those of you that use them
together for RTTY. This past weekend I set my K3 up and operated the
WPX RTTY contest for a little while. Everything went well. After the
contest I was rag chewing in CW and my audio on the k3 quit for a little
while. No audio from speaker or headphones. I got it back to working by
turning the K3 off and on a few times and has worked ever since. My
question is, what should the Line In setting on sound card be? I have
seen where some mentioned it should be on between 4& 5 counting down
from the top and have seen where some have it all the way up. On my K3
Line In I had it set at abt 13. I tried to set it where the ALC was 4
bars solid and 5 flashing a little bit. I was afraid that I my have
damages the audio input when my audio cut out. So I was not going to
operate any more RTTY until found more info about the settings. This
may not have anything to do with my audio cutting out for a little while
but that was the only change that I made since I last used it on cw. I
followed the instruction from mmtty on how to setup for a K3. Just
thought I would ask to see what some other people might have there
settings at.
TIA
John
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
